During the supply of electrical power to multiple circuits, two or more are interconnected with a single wire. As a result, the inappropriate electrical connection is opened, and the wire’s insulation may be harmed because of heat in the cables. This condition can result in an open circuit, which is too hazardous for power distribution. In this case, the numerous wires are correctly connected using an electric bus system to prevent open-circuit conditions.

The busbar is an efficient electrical component used in distribution systems of electrical power to collect electrical current from the input data terminals of the electrical system and distribute it to several output circuits. It is utilized as a connector among the input and output power. Therefore, it distributes the current equally to several output circuits with great flexibility.

What is Busbar?

A conductor or the conducting material used to collect electrical power from the electrical system’s input terminals and distribute it to several output electrical circuits is called a bus system or an electrical busbar. It functions as a connector, where the incoming and outgoing power meets. It is utilized to collect electrical energy in a single place.

List of Busbars and Their Benefits

Here are some of the fantastic busbars we offer, and their benefits

IP68 (Cast Resin)

This busbar electrical system is designed to equally distribute electrical power in the low-electric current installation; this is a perfect alternative to various cabling.

Advantages of IP68 Cast Resin

  • Wide Range from 400A to 6150A
  • Outdoor IP68
  • High Short Circuit-Withstand
  • Overload Capacity 20% in 2 Hours
  • Full Encapsulated in Epoxy Resin

IP55 Feeder

This busbar electrical system is utilized for power distribution, specifically from a transformer to a switchboard and switchboard-to-switchboard connection. It is also the prime distributor for commercial, industrial, and service applications.

Benefits of IP55 Feeder

There are multiple benefits of using IP55 Feeder:
  • Nominal rating guaranteed for flat as well as edgewise installation.
  • Nominal rating guaranteed with a temperature of 40-degree Celsius.
  • A protection degree is guaranteed for an apartment as well as edgewise installations.
  • Painted aluminium exuded alloy resulting in high mechanical strength characteristics.
  • Smaller and Lighter

IP55 Riser Bar

Among the most common applications for IP55 busbar is to disperse electrical power among multiple floors of a building structure. Typical IP55 installations would be commercial properties, like residential and office scenarios, like high-rise flats and hotels. Tap-off units are built at particular locations within the design phase to let the electrical power be moved from the rising busbar to localized distribution boards where localized circuits are wired.

Advantages of IP55 Riser Bar

Adaptability: Elements can change direction at 90-degree and can be very pliable in design, which means they can be utilized in any structure. Tip-offs can be designed in a project where you require them to be.
Cost – Labor and Material: In contrast to the number of cables required to give a similar capacity across various locations/floors, the rising busbar is more cost-effective.
Elements come in about 3 meters, and the installation process is usually faster, meaning that the rising busbar needs less time and less labour to install.

Wrapping Up

Busbars are metal bars that are utilized to carry electrical current. They are generally made from aluminium and copper; busbars are flat and rigid – wider than regular cables and up to 70% shorter in length.

Moreover, they carry more electrical power than regular cables with a similar cross-section area. These elements make busbars perfect for high-voltage electrical connections in EVs (Electric Vehicles). In this article, we have listed some types of Busbars, along with their benefits.