Ice makers are convenient machines in our homes. You don’t have to deal with the tress of ice trays of buying ice from your local store. An ice maker will allow you to enjoy an undisrupted supply of ice in your home—not unless it’s not working normally.
Interestingly, you’ll come to appreciate the value of your ice make the moment it stops working. Several problems can make your ice maker stop working. Some of the problems highlighted here are common, and you can solve most of these problems without hiring a technician.
The following are some of the common ice maker problems that you might experience at your home.
Ice maker not dispensing ice
This is a common problem that most people an ice maker experience. When you notice this issue, first check to ensure that there’s sufficient water flow to the ice maker. To do this, just turn on the water. Make sure that the ice maker’s feeler isn’t blocked, or is not turned off. If you don’t know what the filler is, it’s the arm that shoves ice cubes to the outside tray. Pilling of ice can make the filler to remain up, and this can prevent the machine from dispensing ice.
Also, check to make sure that the water pressure is ok. If the water pressure is low, water won’t flow into the machine—meaning it will not make ice. It’s important to let experts do regular maintenance and checkup of your ice maker for it to continue functioning optimally.
Not making ice
If your ice maker isn’t making ice, check to see if you’ve turned on the machine. Then, ensure that you have set the thermometer to the ideal temperature required for ice making. At times, the machine will not make ice, even after making sure that it’s switched on and it’s set to the right temperature.
If you notice this problem, there is a possibility that the water supply line is clogged or frozen. The solution to this problem is to turn off the machine and defrost it. In case this doesn’t solve the issue, then consider having an expert in appliance repair check your ice maker.
Ice Maker is Leaking
Signs of water on the areas surrounding your ice maker indicate that the ice maker is leaking. To solve this problem, make sure that the machine’s position is level. Then, inspect the water pipes to see if they are damaged or not. Also, you should inspect the ice maker’s filler cup to ensure that it’s in the right position.
You should have a technician check your machine if it’s still leaking after confirming that there are none of the issues stated above.
Not making sufficient ice
If the ice maker isn’t making enough ice as it used to before, you should check whether the water supply line is frozen or partially blocked. Defrosting the ice maker can solve this problem. However, if that doesn’t solve this issue, contact ice maker repair experts to check the machine.
The machine is frozen
Your ice maker can freeze up if the water getting into the mold freezes. The solution to this problem is seeing the thermostat to the ideal temperature. If you notice that the water still freezes up before getting into the machine, but the temperature is ok, the machine might be broken. Therefore, consider replacing or repairing the ice maker.
Dispensing dirty or smelly cubes
There is nothing bad as your ice maker dispensing smelly or dirty ice cubes. This problem occurs when you’ve not changed the filter for a while. You should always change the ice maker filter twice a year if you don’t want to experience this issue.
The ice maker makes funny noises
At times your ice maker will make some strange noises. You should never ignore this issue. The strange noises from the machine could be as a result of an issue with the compressor or temperature control unit. Water getting into the defroster heater can also be a major cause of this issue.
Too large or too small ice cubes
Today, most ice makers come with an ice cube size adjustment feature. If you notice that the ice maker is dispensing ice cubes of the wrong size it could be because of the following things.
- The ice size controller is nudged or broken – first, check the controller—there is a possibility that it got bumped when you were accessing or stocking the freezer. Also, there is a possibility that it’s broken. First, try readjusting the ice cube size, and then check to see if the problem is solved.
- Problem with the water supply valves – broken valve or water supply line means that the ice maker is getting little water for each ice cube—even when you’ve set the tray correctly.
- Defective inlet valve and switch – these are the parts that feed water to the supply line. Also, issues with these two parts can make the ice maker dispense too small ice cubes.
- It doesn’t matter with the refrigerator model that you own—these are some of the common ice maker problems that you are bound to experience. However, following these tips can assist you troubleshoot these problems.
However, if you’ve tried all the above tips and you’ve not solved the issue with your ice maker, consider contacting an expert from Tampa Appliance Repair and schedule a repair. These experts have lots of experience in repairing ice makers and are ready to serve you.
